Soluble thiabendazolium salts with anthelminthic properties.

Thiabendazole is an anthelmintic drug used to treat strongyloidiasis (threadworm), cutaneous and visceral larva migrans, trichinosis, and other parasites. The active pharmaceutical ingredient is typically administered orally as tablets that should be chewed before swallowing. Current formulations combine the active ingredient with excipients, including sodium saccharinate as a sweetener. Thiabendazole's low aqueous solubility hinders fast dissolution and absorption through the mucous membranes. We sought to reformulate this medicine to improve both solubility and palatability. We utilized the possibility of protonation of the azole nitrogen atom and selected four different hydrogen donors: saccharin, fumaric, maleic, and oxalic acids. Solvothermal synthesis resulted in salts with each co-former, whereas neat and liquid-assisted grinding enabled the synthesis of additional formulations. Product formation was observed by powder X-ray diffraction. To better understand the structural basis of the proton transfer, we solved the crystal structures of the salts with saccharin, maleic acid, and oxalic acid using single-crystal X-ray diffraction. The structure of the salt with fumaric acid was solved by powder X-ray diffraction. We further characterized the salts with vibrational spectroscopic and thermoanalytical methods. We report a broad tunability of the aqueous solubility of thiabendazole by salt formation. Reformulation with maleic acid provided a 60-fold increase in solubility, while saccharin and oxalic acid gave a modest improvement. Fumaric acid resulted in a solid with only slightly higher solubility. Furthermore, saccharin is a sweetener, while the acids taste sour. Therefore, the salts formed also result in an intrinsic improvement of palatability. These results can inform new strategies for oral and chewable tablet formulations for treating helminthic infections.

Handling fluorinated gases as solid reagents using metal-organic frameworks.

Fluorine is an increasingly common substituent in pharmaceuticals and agrochemicals because it improves the bioavailability and metabolic stability of organic molecules. Fluorinated gases represent intuitive building blocks for the late-stage installation of fluorinated groups, but they are generally overlooked because they require the use of specialized equipment. We report a general strategy for handling fluorinated gases as benchtop-stable solid reagents using metal-organic frameworks (MOFs). Gas-MOF reagents are prepared on gram-scale and used to facilitate fluorovinylation and fluoroalkylation reactions. Encapsulation of gas-MOF reagents within wax enables stable storage on the benchtop and controlled release into solution upon sonication, which represents a safer alternative to handling the gas directly. Furthermore, our approach enables high-throughput reaction development with these gases.

Emissive Substoichiometric Covalent Organic Frameworks for Water Sensing and Harvesting.

Emissive covalent organic frameworks (COFs) have recently emerged as next-generation porous materials with attractive properties such as tunable topology, porosity, and inherent photoluminescence. Among the different types of COFs, substoichiometric frameworks (so-called Type III COFs) are especially attractive due to the possibility of not only generating unusual topology and complex pore architectures but also facilitating the introduction of well-defined functional groups at precise locations for desired functions. Herein, the first example of a highly emissive (PLQY 6.8%) substoichiometric 2D-COF (COF-SMU-1) featuring free uncondensed aldehyde groups is reported. In particular, COF-SMU-1 features a dual-pore architecture with an overall bex net topology, tunable emission in various organic solvents, and distinct colorimetric changes in the presence of water. To gain further insights into its photoluminescence properties, the charge transfer, excimer emission, and excited state exciton dynamics of COF-SMU-1 are investigated using femtosecond transient absorption spectroscopy in different organic solvents. Additionally, highly enhanced atmospheric water-harvesting properties of COF-SMU-1 are revealed using FT-IR and water sorption studies.The findings will not only lead to in-depth understanding of structure-property relationships in emissive COFs but also open new opportunities for designing COFs for potential applications in solid-state lighting and water harvesting.

Kinetic Trapping of Photoluminescent Frameworks During High-Concentration Synthesis of Non-Emissive Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes with potential utility in gas separations, drug delivery, sensing, and catalysis. Small variations in MOF synthesis conditions can lead to a range of accessible frameworks with divergent chemical or photophysical properties. New methods to controllably access phases with tailored properties would broaden the scope of MOFs that can be reliably prepared for specific applications. Herein, we demonstrate that simply increasing the reaction concentration during the solvothermal synthesis of M2(dobdc) (M = Mg, Mn, Ni; dobdc4- = 2,5-dioxido-1,4-benzenedicarboxylate) MOFs unexpectedly leads to trapping of a new framework termed CORN-MOF-1 (CORN = Cornell University) instead. In-depth spectroscopic, crystallographic, and computational studies support that CORN-MOF-1 has a similar structure to M2(dobdc) but with partially protonated linkers and charge-balancing or coordinated formate groups in the pores. The resultant variation in linker spacings causes CORN-MOF-1 (Mg) to be strongly photoluminescent in the solid state, whereas H4dobdc and Mg2(dobdc) are weakly emissive due to excimer formation. In-depth photophysical studies suggest that CORN-MOF-1 (Mg) is the first MOF based on the H2dobdc2- linker that likely does not emit via an excited state intramolecular proton transfer (ESIPT) pathway. In addition, CORN-MOF-1 variants can be converted into high-quality samples of the thermodynamic M2(dobdc) phases by heating in N,N-dimethylformamide (DMF). Overall, our findings support that high-concentration synthesis provides a straightforward method to identify new MOFs with properties distinct from known materials and to produce highly porous samples of MOFs, paving the way for the discovery and gram-scale synthesis of framework materials.

Deep eutectic solvents comprising creatine and citric acid and their hydrated mixtures.

We report the phase diagram for the binary creatine-citric acid mixture which features a stable and broad eutectic region. Combinations containing 10-60 mol% creatine yield a deep eutectic solvent with a glass transition temperature at 270 K. Addition of up to 70 mol% water to the binary mixture affords retention of the eutectic nature and a handle to vary solvent viscosity and polarity.

Defects Formation and Amorphization of Zn-MOF-74 Crystals by Post-Synthetic Interactions with Bidentate Adsorbates.

The controlled introduction of defects into MOFs is a powerful strategy to induce new physiochemical properties and improve their performance for target applications. Herein, we present a new strategy for defect formation and amorphization of the canonical MOF-74 frameworks based on fine-tuning of adsorbate-framework interactions in the metal congener, hence introducing structural defects. Specifically, we demonstrate that controlled interactions between the MOF and bidentate ligands adsorbed in the pores initiates defect formation and eventual amorphization of the crystal. These structural features unlock properties that are otherwise absent in the ordered framework, such as broad-band fluorescence. The ability to introduce defects by adsorbate-framework interactions, coupled with the inherent tunability and modularity of these structures, provides a new route for the synthesis of diverse heterogeneous and hybrid materials.

Titan in a Test Tube: Organic Co-crystals and Implications for Titan Mineralogy.

In this Account, we highlight recent work in the developing field of mineralogy of Saturn's moon Titan, focusing on binary co-crystals of small organic molecules. Titan has a massive inventory of organic molecules on its surface that are formed via photochemistry in the atmosphere and likely processing on the surface as well. Physical processes both in the atmosphere and on the surface can lead to molecules interacting at cryogenic temperatures. Recent laboratory work has demonstrated that co-crystals between two or more molecules can form under these conditions. In the organic-rich environment of Titan, such co-crystals are naturally occurring minerals and a critical area of research to understand the physical, chemical, and possibly even biological and prebiotic processes occurring in this alien world.With a future NASA mission, Dragonfly, slated to land on Titan in the next decade, much work is needed to understand organic mineralogy in order to properly interpret the data from this and past Titan missions, such as Cassini-Huygens. By cataloging Titan minerals and their properties, we can begin to connect these behaviors to large-scale surface features observed on Titan (labyrinth terrain, lake evaporites, karst, dunes, etc.), and possible processes leading to their formation (erosion, deposition, etc.). To date, seven co-crystals (aside from clathrates and hydrates) have been experimentally reported to form under Titan-relevant conditions, with an eighth predicted by theoretical modeling. This Account will summarize the formation and properties of these cryominerals and discuss the implications for surface processes on Titan. Enhanced thermal expansion and decreased crystal size, for example, may lead to fracturing and/or more rapid erosion of co-crystal-based deposits; density changes upon co-crystal formation may also play a role in organic diagenesis and metamorphism on Titan. Some cryominerals with stability only under certain conditions may preserve the evidence of Titan's history, such as cryovolcanic activity, ethane fluvial/pluvial exposure, and outgassing of CO2 from the interior of the moon.In this Account, we will also highlight areas of future work, such as the characterization of pure molecular solids and the search for ternary (and more complex) co-crystals. We note that on Titan, organic chemistry dominates, which gives a unique opportunity for chemists to play an even more significant role in planetary science discoveries and likewise in discoveries motivated by planetary science to inform fundamental organic and physical chemistry research.

Magnetic ordering through itinerant ferromagnetism in a metal-organic framework.

Materials that combine magnetic order with other desirable physical attributes could find transformative applications in spintronics, quantum sensing, low-density magnets and gas separations. Among potential multifunctional magnetic materials, metal-organic frameworks, in particular, bear structures that offer intrinsic porosity, vast chemical and structural programmability, and the tunability of electronic properties. Nevertheless, magnetic order within metal-organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating a strong magnetic exchange. Here we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at TC = 225 K in a mixed-valence chromium(II/III) triazolate compound, which represents the highest ferromagnetic ordering temperature yet observed in a metal-organic framework. The itinerant ferromagnetism proceeds through a double-exchange mechanism, which results in a barrierless charge transport below the Curie temperature and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics.

Peritectic phase transition of benzene and acetonitrile into a cocrystal relevant to Titan, Saturn's moon.

Benzene and acetonitrile are two of the most commonly used solvents found in almost every chemical laboratory. Titan is one other place in the solar system that has large amounts of these compounds. On Titan, organic molecules are produced in the atmosphere and carried to the surface where they can mineralize. Here, we report the phase diagram of mixtures of acetonitrile and benzene, and provide an account of the structure and composition of the phases. To mimic the environment on Titan more accurately, we tested the stability of the structure under liquid ethane. The results provide new insights into the structure and stability of potential extraterrestrial minerals. In light of Dragonfly, NASA's upcoming mission to Titan, revisiting the fundamental chemistry of the smallest molecules with modern methods and techniques can have significant contributions to this epochal mission and can open new research directions in chemistry.

Palladium-catalyzed oxidative homocoupling of pyrazole boronic esters to access versatile bipyrazoles and the flexible metal-organic framework Co(4,4'-bipyrazolate).

A facile route to 4,4'-bipyrazole (H2bpz) and other symmetric bipyrazoles is achieved via the palladium-catalyzed homocoupling of a pyrazole boronic ester in the presence of air and water, enabling us to provide the first crystal structures and evidence of structural phase changes in the bipyrazolate-based metal-organic framework Co(bpz).

Cooperative adsorption of carbon disulfide in diamine-appended metal-organic frameworks.

Over one million tons of CS2 are produced annually, and emissions of this volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed diamine-appended metal-organic frameworks capable of selectively capturing CO2 through a cooperative insertion mechanism that promotes efficient adsorption-desorption cycling. We therefore sought to explore the ability of these materials to capture CS2 through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS2 is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M2(dobpdc) (M = Mg, Mn, Zn; dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. In the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. This work demonstrates that the cooperative insertion mechanism can be generalized to other high-impact target molecules.

Influence of Metal Substitution on the Pressure-Induced Phase Change in Flexible Zeolitic Imidazolate Frameworks.

Metal-organic frameworks that display step-shaped adsorption profiles arising from discrete pressure-induced phase changes are promising materials for applications in both high-capacity gas storage and energy-efficient gas separations. The thorough investigation of such materials through chemical diversification, gas adsorption measurements, and in situ structural characterization is therefore crucial for broadening their utility. We examine a series of isoreticular, flexible zeolitic imidazolate frameworks (ZIFs) of the type M(bim)2 (SOD; M = Zn (ZIF-7), Co (ZIF-9), Cd (CdIF-13); bim- = benzimidazolate), and elucidate the effects of metal substitution on the pressure-responsive phase changes and the resulting CO2 and CH4 step positions, pre-step uptakes, and step capacities. Using ZIF-7 as a benchmark, we reexamine the poorly understood structural transition responsible for its adsorption steps and, through high-pressure adsorption measurements, verify that it displays a step in its CH4 adsorption isotherms. The ZIF-9 material is shown to undergo an analogous phase change, yielding adsorption steps for CO2 and CH4 with similar profiles and capacities to ZIF-7, but with shifted threshold pressures. Further, the Cd2+ analogue CdIF-13 is reported here for the first time, and shown to display adsorption behavior distinct from both ZIF-7 and ZIF-9, with negligible pre-step adsorption, a ∼50% increase in CO2 and CH4 capacity, and dramatically higher threshold adsorption pressures. Remarkably, a single-crystal-to-single-crystal phase change to a pore-gated phase is also achieved with CdIF-13, providing insight into the phase change that yields step-shaped adsorption in these flexible ZIFs. Finally, we show that the endothermic phase change of these frameworks provides intrinsic heat management during gas adsorption.

Hypervalent Iodine Compounds with Tetrazole Ligands.

Hypervalent iodine compounds with two I-N bonds, containing 5-substituted tetrazoles as the ligands PhI(N4CR)2 (R = CH3, C6H5, and 4-CH3C6H4), were synthesized from PhI(O2CCF3)2 or PhICl2 and the corresponding tetrazole potassium salts. Alternatively, PhIO was reacted with the free tetrazoles, and the reactions afforded either PhI(N4CR)2 or, in most cases, µ-oxo- or oligomeric compounds with several I and O atoms in the backbone and two terminal tetrazole groups. The isolated compounds were reasonably stable in the solid state as well as in solution at room temperature but explosive at elevated temperatures (135-180 °C depending on the structure). The crystal structure of one representative compound (an oligomer with three I atoms in the backbone and 5-phenyltetrazole end groups) was solved and refined from synchrotron powder X-ray diffraction. The novel compounds were characterized by cyclic voltammetry and were found to be strong oxidants. In addition, they proved to be useful reagents for the iodotetrazolylation of unsaturated compounds such as styrene and cyclohexene and for the transfer of tetrazole groups to N, N-dimethylaniline.

Near-Perfect CO2/CH4 Selectivity Achieved through Reversible Guest Templating in the Flexible Metal-Organic Framework Co(bdp).

Metal-organic frameworks are among the most promising materials for industrial gas separations, including the removal of carbon dioxide from natural gas, although substantial improvements in adsorption selectivity are still sought. Herein, we use equilibrium adsorption experiments to demonstrate that the flexible metal-organic framework Co(bdp) (bdp2- = 1,4-benzenedipyrazolate) exhibits a large CO2 adsorption capacity and approaches complete exclusion of CH4 under 50:50 mixtures of the two gases, leading to outstanding CO2/CH4 selectivity under these conditions. In situ powder X-ray diffraction data indicate that this selectivity arises from reversible guest templating, in which the framework expands to form a CO2 clathrate and then collapses to the nontemplated phase upon desorption. Under an atmosphere dominated by CH4, Co(bdp) adsorbs minor amounts of CH4 along with CO2, highlighting the importance of studying all relevant pressure and composition ranges via multicomponent measurements when examining mixed-gas selectivity in structurally flexible materials. Altogether, these results show that Co(bdp) may be a promising CO2/CH4 separation material and provide insights for the further study of flexible adsorbents for gas separations.

Ultrahigh Damping Capacities in Lightweight Structural Materials.

The demand to outperform current technologies pushes scientists to develop novel strategies, which enable the fabrication of materials with exceptional properties. Along this line, lightweight structural materials are of great interest due to their versatile applicability as sensors, catalysts, battery electrodes, and acoustic or mechanical dampers. Here, we report a strategy to design ultralight (ρ = 3 mg/cm3) and hierarchically structured ceramic scaffolds of macroscopic size. Such scaffolds exhibit mechanical reversibility comparable to that of microscopic metamaterials, leading to a macroscopically remarkable dynamic mechanical performance. Upon mechanical loading, these scaffolds show a deformation mechanism similar to polyurethane foams, and this resilience yields ultrahigh damping capacities, tan δ, of up to 0.47.

Record High Hydrogen Storage Capacity in the Metal-Organic Framework Ni2(m-dobdc) at Near-Ambient Temperatures.

Hydrogen holds promise as a clean alternative automobile fuel, but its on-board storage presents significant challenges due to the low temperatures and/or high pressures required to achieve a sufficient energy density. The opportunity to significantly reduce the required pressure for high density H2 storage persists for metal-organic frameworks due to their modular structures and large internal surface areas. The measurement of H2 adsorption in such materials under conditions most relevant to on-board storage is crucial to understanding how these materials would perform in actual applications, although such data have to date been lacking. In the present work, the metal-organic frameworks M2(m-dobdc) (M = Co, Ni; m-dobdc4- = 4,6-dioxido-1,3-benzenedicarboxylate) and the isomeric frameworks M2(dobdc) (M = Co, Ni; dobdc4- = 1,4-dioxido-1,3-benzenedicarboxylate), which are known to have open metal cation sites that strongly interact with H2, were evaluated for their usable volumetric H2 storage capacities over a range of near-ambient temperatures relevant to on-board storage. Based upon adsorption isotherm data, Ni2(m-dobdc) was found to be the top-performing physisorptive storage material with a usable volumetric capacity between 100 and 5 bar of 11.0 g/L at 25 °C and 23.0 g/L with a temperature swing between -75 and 25 °C. Additional neutron diffraction and infrared spectroscopy experiments performed with in situ dosing of D2 or H2 were used to probe the hydrogen storage properties of these materials under the relevant conditions. The results provide benchmark characteristics for comparison with future attempts to achieve improved adsorbents for mobile hydrogen storage applications.

Enantioselective Recognition of Ammonium Carbamates in a Chiral Metal-Organic Framework.

Chiral metal-organic frameworks have attracted interest for enantioselective separations and catalysis because of their high crystallinity and pores with tunable shapes, sizes, and chemical environments. Chiral frameworks of the type M2(dobpdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) seem particularly promising for potential applications because of their excellent stability, high internal surface areas, and strongly polarizing open metal coordination sites within the channels, but to date these materials have been isolated only in racemic form. Here, we demonstrate that when appended with the chiral diamine trans-1,2-diaminocyclohexane (dach), Mg2(dobpdc) adsorbs carbon dioxide cooperatively to form ammonium carbamate chains, and the thermodynamics of CO2 capture are strongly influenced by enantioselective interactions within the chiral pores of the framework. We further show that it is possible to access both enantiomers of Mg2(dobpdc) with high enantiopurity (≥90%) via framework synthesis in the presence of varying quantities of d-panthenol, an inexpensive chiral induction agent. Investigation of dach-M2(dobpdc) samples following CO2 adsorption-using single-crystal and powder X-ray diffraction, solid-state nuclear magnetic resonance spectroscopy, and density functional theory calculations-revealed that the ammonium carbamate chains interact extensively with each other and with the chiral M2(dobpdc) pore walls. Subtle differences in the non-covalent interactions accessible in each diastereomeric phase dramatically impact the thermodynamics of CO2 adsorption.

A spin transition mechanism for cooperative adsorption in metal-organic frameworks.

Cooperative binding, whereby an initial binding event facilitates the uptake of additional substrate molecules, is common in biological systems such as haemoglobin. It was recently shown that porous solids that exhibit cooperative binding have substantial energetic benefits over traditional adsorbents, but few guidelines currently exist for the design of such materials. In principle, metal-organic frameworks that contain coordinatively unsaturated metal centres could act as both selective and cooperative adsorbents if guest binding at one site were to trigger an electronic transformation that subsequently altered the binding properties at neighbouring metal sites. Here we illustrate this concept through the selective adsorption of carbon monoxide (CO) in a series of metal-organic frameworks featuring coordinatively unsaturated iron(ii) sites. Functioning via a mechanism by which neighbouring iron(ii) sites undergo a spin-state transition above a threshold CO pressure, these materials exhibit large CO separation capacities with only small changes in temperature. The very low regeneration energies that result may enable more efficient Fischer-Tropsch conversions and extraction of CO from industrial waste feeds, which currently underutilize this versatile carbon synthon. The electronic basis for the cooperative adsorption demonstrated here could provide a general strategy for designing efficient and selective adsorbents suitable for various separations.

Calcium Coordination Solids for pH-Triggered Release of Olsalazine.

Calcium coordination solids were synthesized and evaluated for delivery of olsalazine (H4 olz), an anti-inflammatory compound used for treatment of ulcerative colitis. The materials include one-dimensional Ca(H2 olz)⋅4 H2 O chains, two-dimensional Ca(H2 olz)⋅2 H2 O sheets, and a three-dimensional metal-organic framework Ca(H2 olz)⋅2DMF (DMF=N,N-dimethylformamide). The framework undergoes structural changes in response to solvent, forming a dense Ca(H2 olz) phase when exposed to aqueous HCl. The compounds Ca(H2 olz)⋅x H2 O (x=0, 2, 4) were each pressed into pellets and exposed to simulated gastrointestinal fluids to mimic the passage of a pill from the acidic stomach to the pH-neutral intestines. All three calcium materials exhibited a delayed release of olsalazine relative to Na2 (H2 olz), the commercial formulation, illustrating how formulation of a drug within an extended coordination solid can serve to tune its solubility and performance.

A Diaminopropane-Appended Metal-Organic Framework Enabling Efficient CO2 Capture from Coal Flue Gas via a Mixed Adsorption Mechanism.

A new diamine-functionalized metal-organic framework comprised of 2,2-dimethyl-1,3-diaminopropane (dmpn) appended to the Mg2+ sites lining the channels of Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) is characterized for the removal of CO2 from the flue gas emissions of coal-fired power plants. Unique to members of this promising class of adsorbents, dmpn-Mg2(dobpdc) displays facile step-shaped adsorption of CO2 from coal flue gas at 40 °C and near complete CO2 desorption upon heating to 100 °C, enabling a high CO2 working capacity (2.42 mmol/g, 9.1 wt %) with a modest 60 °C temperature swing. Evaluation of the thermodynamic parameters of adsorption for dmpn-Mg2(dobpdc) suggests that the narrow temperature swing of its CO2 adsorption steps is due to the high magnitude of its differential enthalpy of adsorption (Δhads = -73 ± 1 kJ/mol), with a larger than expected entropic penalty for CO2 adsorption (Δsads = -204 ± 4 J/mol·K) positioning the step in the optimal range for carbon capture from coal flue gas. In addition, thermogravimetric analysis and breakthrough experiments indicate that, in contrast to many adsorbents, dmpn-Mg2(dobpdc) captures CO2 effectively in the presence of water and can be subjected to 1000 humid adsorption/desorption cycles with minimal degradation. Solid-state 13C NMR spectra and single-crystal X-ray diffraction structures of the Zn analogue reveal that this material adsorbs CO2 via formation of both ammonium carbamates and carbamic acid pairs, the latter of which are crystallographically verified for the first time in a porous material. Taken together, these properties render dmpn-Mg2(dobpdc) one of the most promising adsorbents for carbon capture applications.